House Wrap: Air Sealing and Protection From the Elements

Use house wrap when framing a home to block out moisture and unwanted air.

When you go out in bad weather, you wear a jacket to protect yourself from rain, wind and other elements. A home should be protected in the same fashion. Without a protective barrier, the home can get wet, which can lead to wood rot and mold growth.

Is there a better way to protect a home from these elements?

Using a house wrap during the framing stage of construction will prevent moisture from entering the home. This will protect the house from rotting and from developing mold or fungus. Additionally, air infiltration through the framed walls will be blocked.

The "best practice" for protecting your home from wind and water while allowing it to "breathe" is to install a layer of "house wrap" made of a thin layer of spun-bonded polyethylene.

Here's how to do it:

  1. Start at a corner, but make sure you have 2 to 3 feet of house wrap to overlap the corner. Wrap it around the corner and continue nailing or stapling as you move. Wrap the entire building, including door and window openings.
  2. Use button nails or minimum 1-inch staples to fasten the house wrap every 12 to 18 inches along the vertical studs.
  3. Make an inverted "y" cut, or "martini glass cut," over the window openings. Fold the flaps in through the opening of the two sides and the sill and fasten them inside.

Many builders do not install a drainage plane at all. The builders who do often install "building paper," a sheet of asphalt-impregnated felt paper, to protect the house from exterior water penetration. Unlike house wrap, however, building paper doesn't effectively reduce air infiltration because it has many seams, while house wrap is a continuous sheet with minimal overlaps.

House wrap produces a breathable, weather-resistant barrier that will reduce energy costs and prevent wind-driven rain from entering the walls of a home.

Next Up

Installing Spray Foam Insulation to Boost Your Home's Air Quality and Energy Efficiency

Improve your home's energy efficiency with spray foam insulation. Learn about the difference between open-cell and closed-cell, the cost of spray foam insulation and whether it's a good DIY project.

Sealing a Home's Air Leaks

Improve energy efficiency and health by reducing air leakage.

How to Stop Interior Drafts

Learn how sheathing behind tubs, showers and the fireplace can eliminate energy-sapping drafts.

Insulated Concrete Forms

Insulated concrete forms (ICFs) offer several advantages: energy efficiency, safety and soundproofing.

Insulating Beneath the Basement Slab

Keep heat in and keep moisture out with an insulation layer under your home.

Choosing the Right Heating System: Heat Pump vs. Furnace?

Compare systems to understand the benefits for your home based on your geography and household needs. The right system will help improve your home's energy efficiency and reduce utility costs.

How to Insulate an Attic

Whether your attic is finished or unfinished, choosing proper insulation requires a fair amount of planning. Learn more about batts-and-blankets, rigid foam and loose-fill insulation options that will help keep your house warm in the winter and cool in the summer.

How to Heat and Cool a Backyard Greenhouse

Find passive and powered methods for heating and cooling your greenhouse.

Save With Home Insulation

Addressing leaky ducts and adding attic insulation can save you significantly on your energy bills.

How Much Does Solar Power Cost?

If the sun shines brightly at your home, you could be making your own electricity instead of paying for it.

Go Shopping

Get product recommendations from HGTV editors, plus can’t-miss sales and deals.


Follow Us Everywhere

Join the party! Don't miss HGTV in your favorite social media feeds.