How to Make a Pet Feeding Station
Create a custom feeding station that will make eating and drinking easier on your pet. Old wooden crates, boxes or stools can all be converted into a piece that's functional for your best friend and will look great in your home.
E-mail This Page to Your Friendsx
A link to %this page% was e-mailed
- found object that is the right height for your pet and can hold 2-3 metal bowls
- 2-3 metal dog food bowls with rims
- permanent marker
- compass or circle cutter
- drill with 1/2" bit
- sandpaper (optional)
- polyurethane (optional)
- paintbrush (optional)
Prepare Found Object
First, consider your pet's height and select an object that is a few inches shorter than his or her muzzle; eating and drinkng from newly raised bowls should be comfortable, so test out a few heights to be sure. If starting with an old box, crate or stool, remove the top. If you're using a piece with an old finish that you want to retain, sand away any chipping or loose paint and apply a coat of polyurethane to prevent further wear. Alternately, you can sand the old finish then cover it with a fresh coat of paint. Tip: When using found objects, always take the time to make them safe to use in a home environment: remove rusty nails, sand wood that could cause splinters and seal chipping paint.
Determine Placement for Bowls
Measure the inside diameter of the bowls with a measuring tape, then determine their placement and spacing on the top surface of the box or other found object that was removed in the previous step (Image 1). Mark where the center point of each bowl will be (Image 2).
Mark Circles for Bowls
Use a compass or circle cutter to draw or score a circle where each bowl will be placed. Make sure each circle is large enough for bowls to easily slide in and out of station for cleaning, but not so large that they fall through. Trace the line with a permanent marker to make the cut line clear.
The handmade experts at HGTV.com share step-by-step instructions for constructing a wood cutting board.