How to Refinish Kitchen Cabinets Like a Pro

Give your existing kitchen cabinets a high-end designer look with these professional refinishing tips.

Keep in mind: Price and stock could change after publish date, and we may make money from these affiliate links.

By: Brian Patrick Flynn

Related To:

Shop This Look

Photo By: Brian Patrick Flynn

Luxe Gray Kitchen Cabinets

The 11-year-old contractor-grade cabinets of this Atlanta kitchen were given a high-end update with a sprayed finish and satin brass hardware.

SHOPPING INSPIRATION

Cabinet Paint Kit

3-Shelf Wall Cabinet

2 Vintage Style Chairs

Sputnik Chandelier

Before

In its original state this kitchen featured blonde-toned contractor-grade cabinets that the homeowner planned to rip out and replace. After talking with a designer, he decided to update them with charcoal paint and stained brass hardware for a sharp, dramatic contrast.

Project Cost and Timeline

While estimates for brand-new custom cabinets start at $12,000, this DIY refinishing project cost $200 in supplies. If tackling a project yourself, it's best to allow two full weekends to complete. Homeowners interested in hiring a cabinet refinishing professional (for kitchens 200-square-feet or smaller) should expect to spend between $900 and $3,000 for labor and transportation costs.

SHOPPING INSPIRATION

Cabinet Paint Kit

Cabinet Finger Pull

Label With Tape

One of the biggest problems homeowners face when reinstalling cabinet door fronts is determining which door goes with which opening. Although doors may appear to be the same size, many vary by as much as 1/4 inch. To avoid confusion, label each cabinet opening and door front with corresponding numbers marked on painter's tape. Remove the labels before spraying cabinet door fronts and casings with primer and paint, then replace once dry to prepare for reinstallation.

SHOPPING INSPIRATION

Labeling Tape

Sharpie Markers (4)

Fill the Holes

If you plan to add new hardware to your cabinets, remember that it's unlikely existing hardware holes will line up with new screws. Fill each hole with wood putty, from front to back.

SHOPPING INSPIRATION

QuikWood Putty Stick

Elmer's Wood Filler

Lightly Sand Surfaces

Sanding is important for several reasons. First, it removes any existing sheen or protective sealant from cabinet drawer and door fronts, allowing primer and paint to bond effectively to the surface. Once applied to areas prepped with wood filler or putty, it also helps to smooth out any existing scratches, dings or nicks. Fine-grit sanding blocks or pads work best for most cabinet and drawer fronts; however, rough-grit sandpaper is suitable for cabinet and drawer fronts with heavy layers of lacquer or shellac.

SHOPPING INSPIRATION

Sanding Block 8-Pack

Invest in Primer

Professional painters use stain-blocking primer not only to create an effective bonding surface for paint, but also to reduce the number of coats. Homeowners using light colors will likely require one coat each of primer and paint. Those using dark or bold shades of paint should opt for a tinted primer. To create a tinted primer, a paint technician adds a base similar in tone to the paint, ensuring efficient coverage.

SHOPPING INSPIRATION

KILZ Bonding Primer

Use an HVLP Paint Sprayer

Homeowners can achieve two different looks with painted cabinets: a sprayed, factory-like finish, or a hand-painted finish with prominent brush strokes. The latter requires a steady hand and great patience, but a sprayed finish is the result of a high-volume, low-pressure (HVLP) paint sprayer. These can be rented from most home improvement stores for about $100 per day. Paint is loaded into a container attached to a spray gun. Once filled, it sprays a fine mist of paint in an even stream, resulting in a clean, even finish. For the smoothest coverage, hold the tip of the spray gun at least 8 inches from the surface of the cabinets and apply using a controlled back-and-forth motion.

SHOPPING INSPIRATION

HVLP Paint Sprayer

Pro Paint Sprayer

Blue Cabinet Paint

Mark With a Jig

Jigs and multimark tools are excellent for seamlessly installing hardware. Similar to rulers or protractors, these small tools come with pre-drilled holes or, alternatively, can be set to different positions with a small dial. Once the desired dimensions are set, the jig or multimark tool can be placed along the edge of each cabinet or drawer front, then marked with a pencil. Since the dimensions are predetermined, the markings will remain consistent as the tool is used for each door and drawer front.

SHOPPING INSPIRATION

Cabinet Handle Jig

Touch Up

It's likely that door and drawer fronts will be nicked, scraped or scratched during transport. Once all door and drawer fronts are installed, any small imperfections should be touched up with a detail brush. If touchup is attempted with a basic paintbrush, a blemish will likely result, making the finish appear uneven or blotchy.

SHOPPING INSPIRATION

Detail Paint Brush Set

Blue Cabinet Paint

Install Hardware

Playing with hardware size and scale is a great way to add designer flair to cabinets. Consider varying sizes of door and drawer pulls, yet sticking with similar styles and finishes. Here the pulls used on the door fronts are 3 inches in width, while the drawer pulls are 7 inches wide. Paired with small cabinet pulls, the extra-wide drawer pulls help to visually anchor the cabinets.

SHOPPING INSPIRATION

Cabinet Finger Pull

Nickel Cabinet Pull

Add Felt Door Dampers

It's important to protect the backs of newly painted door fronts from the casing surrounding them. Over time, opening and closing your cabinets is likely to damage their paint finish. Easily protect both doors and casing by adding felt pads to the bottom corner of each door.

How to Refinish Kitchen Cabinets Like a Pro

Related To:

Shop This Look

Luxe Gray Kitchen Cabinets

SHOPPING INSPIRATION

Cabinet Paint Kit

3-Shelf Wall Cabinet

2 Vintage Style Chairs

Sputnik Chandelier

Before

Project Cost and Timeline

SHOPPING INSPIRATION

Cabinet Paint Kit

Cabinet Finger Pull

Label With Tape

SHOPPING INSPIRATION

Labeling Tape

Sharpie Markers (4)

Fill the Holes

SHOPPING INSPIRATION

QuikWood Putty Stick

Elmer's Wood Filler

Lightly Sand Surfaces

SHOPPING INSPIRATION

Sanding Block 8-Pack

Invest in Primer

SHOPPING INSPIRATION

KILZ Bonding Primer

Use an HVLP Paint Sprayer

SHOPPING INSPIRATION

HVLP Paint Sprayer

Pro Paint Sprayer

Blue Cabinet Paint

Mark With a Jig

SHOPPING INSPIRATION

Cabinet Handle Jig

Touch Up

SHOPPING INSPIRATION

Detail Paint Brush Set

Blue Cabinet Paint

Install Hardware

SHOPPING INSPIRATION

Cabinet Finger Pull

Nickel Cabinet Pull

Add Felt Door Dampers

SHOPPING INSPIRATION

Cabinet Door Bumper

How to Pick Kitchen Cabinet Frames

How to Build a Hidden Trash Can Cabinet

Refinishing Kitchen Cabinet Ideas

Old Kitchen Cabinets

How to Refinish a Kitchen Table

How to Restore a Wooden Bowl

Related Pages