Make a Cool Cottage-Style Window Box Out of PVC Pipe

Pep up a plain window with this clever, easy DIY window box project.

Loading Video...

PVC Window Box

01:10

Accent your windows with these DIY flower boxes made from PVC materials.

Materials

(1) 6”x10’ piece of PVC, cut down to 33” pieces (keep extra for other projects)
Chop saw (optional)
(4) 6” PVC cap fittings
(4) 6” window flower box wall brackets
(1) can of PVC clear cleaner
(1) can of PVC heavy duty clear cement
drill with 3/8” all-purpose bit
jigsaw with PVC cutting blade
2” decking or wood screws (optional, as the brackets we used came with screws)
(1) can exterior spray paint of your choice – We used Krylon FUSION in Satin Rolling Surf color
(1) sanding block 180 grit

Step 1: Mark Rectangle on PVC

Measure and trace out rectangle on PVC pipe that is 5” tall by 24” wide. The rectangle should start 4.5” from edge of PVC.

Step 2: Drill Pilot Holes

Using the 3/8” bit, drill a hole at each corner of the rectangle. This will make turning your corners easier when cutting.

Step 3: Cut Out Rectangle

Using a jigsaw with a PVC blade, begin cutting in corner pilot hole. Follow the lines you traced until entire rectangle is cut out.

Step 4: Drill Drainage Holes

Flip PVC over and drill drainage holes. This will allow water to easily escape your planter.

Step 5: Sand

Use sanding block to smooth out all edges you just cut or drilled.

Step 6: Clean Pipe

Clean pipe with PVC cleaner. Tip: you could also use finger nail polish remover and a cotton ball.

Step 7: Glue Caps On

Immediately after cleaning, use PVC cement to attach caps on each end of pipe. PVC cement comes with an applicator swab attached to the lid. Liberally rub the tips of the pipe and inside the caps before securing together.