How to Build a Pollinator House for Your Garden

Boost your garden's ecosystem and keep bees and other pollinators coming back for more by following these easy steps to create your own DIY pollinator house.

A Finished Pollinator Habitat

It's easy to create an environment that shelters the pollinators so essential to a garden's eco-system.

Photo by: Image courtesy of Ashley English

Image courtesy of Ashley English

By: Ashley English

To help keep some of our favorite foods on the table, it’s important that we take care of our pollinator friends. And not just honeybees! There are countless pollinators that work tirelessly to keep the plant world healthy, so why not take a little time to give them the shelter they deserve after a long day’s work? With a little effort and creativity, you can craft a perfect pollinator house to add visual appeal to your garden and keep the pollinators coming back for more.

Materials Needed

1x8 pine board
3/8” square wooden dowels
1/2” square wooden dowels
1/4” boards
drill
wood screws

pencil
miter saw
measuring tape
wood glue (optional)
paint or stain (optional)

1. Build Box Frame

If you have an old birdhouse or a small wooden box, you may be able to save some time by repurposing it as your pollinator house. If not, start by building a wooden box. There are no rules to how large or small a pollinator house should be, so repurpose some scrap wood if you have it. If not, a 1x8 pine board will do the trick. When cutting and assembling, think of it like a birdhouse. The desired structure should be a wooden box with a closed back, open front and a pitched roof to shed water. Use 2-inch wood screws to assemble. To make a pitched roof, simply cut the back piece longer than the total height of the structure and place the roof piece on top.

Create the Framework of Your House

You can build a simple wooden box, use an old one, or pop the front off of a wooden birdhouse and use that. The front is the open side. It is good to have a little roof over your house, which can be as simple as a slightly pitched board, as with the one shown in the here. You don't want to paint the interior of the house, or the dowels, because the pollinators don't like the paint.

Photo by: Image courtesy of Ashley English

Image courtesy of Ashley English

2. Add Shelves and Dowels

Cut 1/4-inch-thick boards to fit the interior dimensions of the house and cut a few square dowels to fit the depth of the box (Image 1). If you’re able to source them, bamboo tubes also make great spacers in place of the dowels. The idea is to stack rows of dowels separated by the 1/4-inch-thick shelves. We opted to alternate between 3/8-inch and 1/2-inch dowels for a variety of hole sizes. To maintain a consistent space between each dowel, use one of the dowel pieces as a spacer when you’re positioning the pieces. Create a three-dimensional effect on the front by placing some dowels further in and out than others (Image 2). According to experts, it can help the pollinators to recognize their own hole from the others if the entrances are not totally uniform.

The house you build can be as tall or wide as you like, as long as you create even spaced holes, from about 3.5" to 6" inches deep. Separate the levels within the house using 1/4" inch thick boards cut to fit the box that you choose. Any other piece of wood that fits is just fine too.

Image courtesy of Felicia Feaster

Use a combination of 3/8" and 1/2" inch square dowels, cut to the depth of your box (these are readily available at home building supply stores). Space the dowels evenly apart. A handy trick is to use dowels of the same thickness to get even spacing and then remove them. According to some experts, it helps the pollinators to recognize their own hole from the others if the entrances aren't too uniform, so it can be good to cut some of the dowels a teeny bit shorter while leaving others bit longer, giving a bit of 3-dimensional interest to the front.

Image courtesy of Ashley English

Find Shelves and Dowels to Fit Your House

The house you build can be as tall or wide as you like, as long as you create even spaced holes, from about 3.5" to 6" inches deep. Separate the levels within the house using 1/4" inch thick boards cut to fit the box that you choose. Any other piece of wood that fits is just fine too.

Photo By: Image courtesy of Felicia Feaster

Add Your Dowels

Use a combination of 3/8" and 1/2" inch square dowels, cut to the depth of your box (these are readily available at home building supply stores). Space the dowels evenly apart. A handy trick is to use dowels of the same thickness to get even spacing and then remove them. According to some experts, it helps the pollinators to recognize their own hole from the others if the entrances aren't too uniform, so it can be good to cut some of the dowels a teeny bit shorter while leaving others bit longer, giving a bit of 3-dimensional interest to the front.

Photo By: Image courtesy of Ashley English

Pro Tip: To glue or not to glue? It’s totally up to you whether or not you glue the dowels and shelves in place. The positive to gluing is that it helps the dowels to stay in place, but it takes away the ability to remove the dowels and shelves for cleaning and inspection. If your desire is to use the box as a teaching project for children, it can be useful to take the house apart and study the life cycle of the creatures.

Enlist a Helper

If you want, after arranging the dowels where you want them to be, pull each dowel out a little, put a drop of glue on top, and slide them back in, so that they stay in place. You can also just leave them loose if you like, which allows you to take it apart later so that you can see the activity in the house, as well as clean it out, if need be. For young people interested in the life cycle of the creatures, being able to take the house apart is very useful, and it also helps you to unclog holes or weed out unwanted creatures.

Photo by: Image courtesy of Ashley English

Image courtesy of Ashley English

3. Paint Exterior

Once you’ve finished assembling your pollinator house, feel free to paint or seal the exterior with fun colors. This will not only look prettier but add protection against the elements and help water from reaching the pollinators. Refrain from painting or staining the interior, as it deters the pollinators from seeking the shelter.

Finished House

Go ahead and paint the roof and sides if you like, as that adds a fun splash of color to the garden, and helps protect the house from the elements, allowing it to last longer.

Photo by: Image courtesy of Ashley English

Image courtesy of Ashley English

4. Mount Your Masterpiece

Use wood screws to mount your pretty pollinator home wherever you desire. This can be a tree, fence post, the side of a shed or anything you can think of. Now take a step back and enjoy your work!