How to Make Stylish Outdoor Pallet Seating
Bring rustic, repurposed charm to your deck or porch with shipping pallets and cushions.
E-mail This Page to Your Friendsx
A link to %this page% was e-mailed
- 1 wooden shipping pallet for seat structure
- 1 wooden shipping pallet for seat top
- measuring tape
- circular saw
- 2" deck screws
- angle brackets
- 1/2" wood screws
- 1x6 cedar planks
- finish nails
- nail gun
- trim piece
- orbital sander
- 80-grit sandpaper
- seat cushions
- throw pillows
Search local stores or warehouses for discarded shipping pallets. You need two pallets: one for structural support and one for the seat top, sides and back. The seating structure and back pallets should be the same length.
Cut Structural Pieces
Use measuring tape and a pencil to mark the sofa back, seat structure and top pallets to 24x72 inches (Image 1). Cut with a circular saw (Image 2).
Attach Top and Bottom Pallets
Lay structural pallet on the ground, and stack the seat pallet on top so edges and corners are aligned (Image 1). Attach the two pallets by drilling through the top pallet into a solid point on the bottom pallet with 2-inch deck screws (Image 2). Drill 4 points along the front and back edges.
The crafting experts at HGTV.com share step-by-step instructions for turning a basic plank of wood into a family-friendly tree...
The experts at HGTV.com give step-by-step instructions on how to build an outdoor chandelier.
What's hot for outdoor living spaces? Pinterest has spoken! This gallery has the photos HGTV fans loved best and can't stop...(10 photos)