Change a Bulb, Change the World, Save Some Green

Installing energy-saving fluorescent bulbs will not only help save the planet, it will help save your budget.

Font
  • A
  • A
  • A

E-mail This Page to Your Friends

x

All fields are required.

Separate multiple e-mail addresses with a comma; Maximum 20 email addresses.

Refresh

Sending E-mail

Sending E-mail

Or Do Not E-mail

Success!

A link to %this page% was e-mailed

Former Vice President Al Gore has called global warming the "biggest moral challenge facing our global civilization."
But there is hope, he says. As challenging as this issue may be, something as simple as changing a light bulb can have a significant impact on reducing the world's greenhouse gas emissions, the leading cause of global warming.

According to the U.S. Environmental Protection Agency's ENERGY STAR, if every American home replaced just one incandescent light bulb with an energy-saving light bulb, we would prevent greenhouse gases equivalent to the emissions of more than 800,000 cars. Imagine what we could accomplish by swapping out even more?

INCANDESCENT VERSUS FLUORESCENT
To produce light in a traditional incandescent bulb, energy passes through a thin filament, which heats and illuminates it. This technology is extremely inefficient, with only 10 percent of the energy used going to the production of light. The other 90 percent is wasted as heat.

Fluorescent bulbs, on the other hand, produce light by electrically exciting a vapor in the tube, causing it to fluoresce. This process consumes 75 percent to 80 percent less energy, produces far less heat, and yet delivers all the light a person might need.

WHY SWITCH?
"The two main reasons why people should switch to compact fluorescent bulbs (CFLs) are the significant climate benefits and the dramatic energy savings," explains Anthony Kreindler, spokesman for Environmental Defense, a leading non-profit environmental advocacy group.

The environmental and economic benefits of CFLs, he says, make the decision to replace traditional incandescent bulbs a no-brainer. Not only do the bulbs consume a quarter of the energy, they last 10 times longer. This translates into a 30-dollar reduction in electricity costs over the life of each and every bulb.

According to Environmental Defense, if a homeowner replaced 10 60-watt incandescent bulbs with energy-saving alternatives, he or she would save almost $300 in energy costs over the life of the bulbs and prevent the production of 3,400 pounds of carbon dioxide.

BUT AREN'T FLUORESCENT BULBS LOUD, DIM AND UGLY?
Everyone seems to have had not-too-fond experiences with fluorescent bulbs. Not very long ago, most bulbs on the market required a long time to warm up and turn on. And when they finally did, the light they produced was unflattering, cold and often inconsistent. Worst of all, they hummed and buzzed as though they were filled with honeybees.

Well, those days are long gone. Recent technology has cured most ills associated with compact fluorescent bulbs, making them not only a sensible choice, but a painless one as well. Today's models come on quickly and provide quiet, consistent, bright-white light. A myriad of sizes and shapes make them appropriate for any standard fixture, indoors and out. Prices have plummeted, to boot.

WHERE SHOULD I START?
The U.S. Environmental Protection Agency's ENERGY STAR recommends installing energy-saving bulbs in areas where lights are used frequently and left on for a long time. These include the kitchen, family room, dining room, living room and front porch.

SHOPPING FOR CFLS
CFLs now come in varying shades of light, or color temperature, measured in Kelvin. If you prefer a warm, soft glow, look for bulbs with lower Kelvin numbers, typically in the 2700 to 3000K range. For brighter, more natural light, seek out bulbs with higher ratings, in the 4000 to 6000K level.

If the bulbs are going to be used in a dimmable fixture, be sure to buy a bulb specifically designated as a dimmable CFL. Same goes for bulbs to be used in three-way lamps, which must be specified as three-way CFL.

Homeowners might find that a particular CFL is too wide to fit within a table lamp's harp, the metal shade support. Companies like Black Energy (www.blackenergy.com) sell harp extenders for as little as 65 cents. One might also encounter bulbs that are too thick to screw into some light sockets. A simple socket extender, available at Black Energy for $2, should do the trick.

A WORD ABOUT MERCURY
All compact fluorescents contain trace amounts of mercury, a harmful substance. Although the bulbs contain far less mercury than other household items, care needs to be taken to prevent breakage. Also, when CFLs burn out, they should be recycled. To find the closest recycling center near you, visit www.lamprecycle.org.

LIGHT EMITTING DIODES (LEDS)
LEDs can last up to 20 years. And at 90 percent efficiency, the bulbs sip electricity. But this doesn't mean LEDs are ready to supplant all other bulbs just yet. For one, they provide only directional light, not diffused light, making them ideal for under-counter task lighting, but not general room illumination. To overcome this, new models consist of large arrays of LEDs clustered together. But at prices from five to six times higher than CFLs, the bulbs are not for everybody.

Sources

Anthony Kreindler, spokesman
Environmental Defense
www.environmentaldefense.org

We Recommend...

Installing a Tile Floor

Installing a Tile Floor

A stone or ceramic tile floor in the kitchen is durable and adds visual drama.

Change the World

Change the World

Go to hgtv.com/changetheworld to nominate an HGTV Community Crusader.

(video 00:32)
Change in St. Louis

Change in St. Louis

The St. Louis veterans get their first look at their new home.

(video 08:42)
Advertisement

HGTV Inspiration Newsletter

Create your unique, personal style with advice and inspiration from HGTV.