Essential Prep for Painting Your Home's Exterior
Prep is the key to a successful paint job, read these 10 tips before you begin painting the outside of your home.
Photo By: irina88w
Photo By: Dennis Oblander
Photo By: MarcQuebec
Photo By: Ryan McVay ©(c) Ryan McVay
Photo By: ands456
Photo By: dpproductions
Photo By: HaraldBiebel
Photo By: Linda Macpherson
Photo By: Pixel-Productions
Photo By: Laurey W. Glenn
Go for Quality Over Price
Better quality paint means you will paint fewer times over the years, and you'll get better coverage when you do paint. Paint technology has improved dramatically in the past few years, with colors guaranteed to last longer than ever before. You may be tempted to skimp on paint to save money up front with a cheaper brand, but you're bound to have trouble and eventually pay more in the long run.
Paint Doesn't Stick to Dirt
Paint won't adhere very well to dirty or rough surfaces, so be sure to thoroughly clean the siding and trim, allow it to dry and then sand the rough surfaces. Be sure to sand (or scrape as needed) any peeling paint to create a solid surface for the paint to adhere.
Paint Also Won't Stick to Rotten Siding
Rotten wood and siding material are nearly worthless to paint, as they will do nothing but to continue to deteriorate. You have a couple of options. Replace the siding or wood trim with new components, or in the case of small areas, use a wood hardener and match with an exterior filler product, such as a wood filler. Be sure to prep and sand either one prior to painting.
Check the Weather Forecast
Plan ahead when painting. The time of year is key, so consider seasonal weather patterns. Select a dry time of year when there is little rain, low humidity and not extremely cold. Paint needs time to dry and will not adhere to surfaces that are damp.
Prep the Landscape
It's easy to forget how messy painting can be, be sure to cover the ground, bushes and any other vegetation below the area you are painting. Also, move or cover up any outdoor furniture, hoses, grills, etc. Use drop cloths and weigh them down on the corners or securely wrap them around the items you are protecting.
The rule of thumb has always been to apply a good coat of primer, sand, then apply your color coats. This is still a good rule to follow, but new paint technologies have combined primer and paint into one product, which manufacturers assert will cut down on the number of coats you will have to apply. This newer paint is more expensive but may be comparable to the purchase of separate primer and paint. Even if you don't save money, you'll definitely save time.
Combine Cans of Paint
Mixing multiple cans of the same color of paint into a larger container, such as a five-gallon bucket, will help ensure a uniform color is applied to your home's exterior. This step, called boxing the paint, is a method the pros follow. This step is important if, for example, you initially bought a gallon or two of paint less than you needed and then picked up the extra gallons at a later time.
Paint From Top to Bottom
Starting at the top and working your way down while painting helps control streaks, as you will be working with gravity rather than against it. Drips are inevitable, but this method will allow you to feather out mishaps in the direction you are working.
Seal It Off
Properly close your paint containers with their lids after you finish for the day to keep the paint from drying out. Use a rubber mallet to lightly hammer the lid shut. You can also add a plastic wrap film over the opening to ensure a tight seal.
Painted porches (particularly steps) and other painted floors can become a bit slick with a coat of paint alone, so add a little bit of fine sand to the paint to add traction. You can use play sand or additives that manufacturers have begun producing to provide this extra texture.