How to Vent a Clothes Dryer

For maximum efficiency, follow our checklist.
By: Dwight Barnett

Question: We recently purchased our first home, and I’m having trouble with my dryer. It worked fine before the move, but now I have to run it two to three times to get the clothes dry. I asked the movers if something had been damaged in the move, but they told me to call a repairman. I read your article on electrical appliances being damaged by the wiring in the home. Could that be the problem?

Answer: During the drying process, the moisture from the clothes dryer is carried through a vent pipe to the outside of the home. The shorter the vent pipe, the more efficient the drying process.

Most manufacturers recommend a maximum length of vent pipe of 25 feet, not including the elbows found in most installations. When the vent pipe has to make a 90-degree turn to pass through the floor, wall or ceiling, that turn is equal in restriction to a 5-foot section of vent pipe, so the overall length should be shortened to 20 feet.

Here are other things to check for:

  • The lint trap should be clean, and there should be no lint buildup inside the vent pipe. If there’s no buildup and the dryer has to be run more than once to get clothes dry, the problem is usually a vent pipe that is too long or one that has too many turns and bends before exiting the home.
  • Vent pipes should be free of kinks, loose or damaged pipes, pipes that are separated at connecting joints (which dumps all the moisture to the home's interior), lint buildup that’s a fire hazard, and other blockages, such as a bird’s nest in the outside vent opening.
  • There should be a movable or protected cover on the outside of the home that is not blocked by vegetation or stored items. If the cover is damaged, it should be replaced. If screws have been used to connect sections of vent pipe, the screws need to be removed to keep the interior of the vent pipe smooth and lint-free.
  • Sections of vent pipe should be connected with pipe clamps and metallic tape. If your home has a flexible foil or plastic vent pipe, replace it with an approved metal vent pipe. Plastic and most foil-type vent hoses are not approved for the heat generated by a clothes dryer.

(Dwight Barnett is a certified master inspector with the American Society of Home Inspectors.)

Next Up

Laundry Lessons and Tips

This easy system will get you out of the laundry room and back to your life.

Leave on the Air Conditioning to Avoid Mold

Leaving the air conditioning running in your home will not only cool your home, it will help remove moisture from the air and help circulate and filter the air.

Quick Tips for Home Organization

Try these quick home organization tips for maintaining a clutter-free home from basement to attic.

How to Repair a Damaged Roof

We simulated the damage of a tree falling on a roof by dropping a piano from a crane. Such an accident can cause major structural damage. Consult a professional if there are any reframing needs due to building codes.

Fireplace Maintenance and Safety

Tend to your chimney with care with these expert tips.

How to Replace Blown-in Insulation

If leaks are showing up on your ceiling, it's time to fill the insulation gaps.

10 Tips for a Cleaner Refrigerator

Follow these 10 pointers to make your refrigerator shine like brand new.

How to Paint the Exterior of a House walks you through the steps of painting the exterior of a house, from prep work through the finishing touches.

Furnace Maintenance

Save on utility bills and head off carbon monoxide problems with these tips.

10 Home Maintenance Tips for Spring

A certified home inspector shares 10 home-maintenance tips for spring.

Go Shopping

Refresh your home with stylish products handpicked by HGTV editors.

Follow Us Everywhere

Join the party! Don't miss HGTV in your favorite social media feeds.