Low-Sew Roman Shade

With the help of fusible webbing tape and hot glue, this simplified Roman shade requires minimal sewing.
Roman Shade in Bathroom

Low-Sew Roman Shade

With the help of fusible webbing tape and hot glue, this simplified Roman shade requires minimal sewing.

Materials Needed:

  • 2 yards of 48"-wide home decor fabric
  • coordinating all-purpose thread
  • 1/4"-wide wooden dowel rods (8)
  • 4 yards Roman blind ring tape
  • sewing machine
  • pins
  • sharp scissors
  • high-temp hot glue gun
  • glue sticks
  • 1 roll fusible webbing tape
  • iron
  • 1 1" x 2" board cut to window width
  • screw eyes (3)
  • screw hook
  • nylon cord
  • yardstick or ruler
  • pencil

Measure and Cut Fabric

Measure height and width of window, inside frame and sill. Cut fabric to window width, plus 2" for seam allowance. (Example: If inside of window width measures 27-3/4", fabric width should be 29-3/4".)

Hem Edges

Fold under 1" seam allowance on right side and press (Image 1). Insert fusible webbing tape under fold and iron to activate adhesive (Image 2). Repeat on left side.

Pin and Sew Rod Pockets

Fold under bottom edge of fabric (Image 1). Insert dowel rod in fold and pin fabric to form pocket. Using a yardstick or ruler, measure distance between every other ring on tape (Image 2). Use that measurement to determine proper placement for next dowel rod pocket and mark with pencil. Position dowel on mark, fold fabric over and pin to form second pocket. Continue in this manner to top of blind. Remove dowels and stitch along pin lines. Remove pins, trim threads and insert dowels (Image 3).

Affix Ring Tape

Position blind on work surface face down. Line up ring tape on sides, making sure rings line up with rod pockets. Hot glue ring tape into place. Tip: If rod pockets and rings don't line up perfectly, cut twill tape to position rings directly on dowels.

Position the Ring Tape: Step 4

Affix Ring Tape

Position blind on work surface face down. Line up ring tape on sides, making sure rings line up with rod pockets. Hot glue ring tape into place. Tip: If rod pockets and rings don't line up perfectly, cut twill tape to position rings directly on dowels.

Prepare Header Board

Drill two pilot holes through header board for installation screws (Image 1). Tighten 3 screw eyes into bottom side of header board (Image 2). See diagram for proper hardware placement (Image 3).

Thread Cording

Cut two pieces of nylon cording double the window height. Tie end of one cord to second to last ring at bottom of blind on right side (Image 1). Thread through rings that are positioned over dowel rods and up through screw eye. Continue to thread cord through middle and left screw eyes. Repeat on left side, but thread only through left screw eye (Image 2). Pull both cords tight, so the blind is even and make a knot just to the left of the left screw eye. Make one more knot in bottom of cords to keep them together.

Hang Blind

Drill pilot holes in underside of window header trim that match pilot holes drilled in blind header board (Image 1). Hold header board tight to window trim and insert a screw in each pilot hole. Tighten a screw hook in side of window frame to wrap excess cord around when blind is raised (Image 2).

Next Up

How to Frame a Mirror

Transform the look of a bathroom by installing decorative trim around a plain plate-glass mirror.

How to Clean Blinds

Make quick and easy work of it with these nine tips.

How-To: Customize Roman Shades With Fabric

HGTV Magazine shows you how to put your stamp on basic items with these easy makeover ideas.

How to Make a Roman Shade From a Canvas Drop Cloth

Turn boring blinds into a custom window treatment with this simple DIY Roman shade project.

How to Make a Linen and Leather Roman Shade

Make a window treatment from natural linen and leather straps for a classic look.

Use a Vintage Doorknob As a Curtain Tieback

Add vintage elegance and style to your windows by repurposing old doorknobs as curtain tiebacks.

Add Shade + Privacy With Outdoor Drapery Panels

Turn your outdoor space into a shady, peaceful retreat by giving ready-made drapery panels a quick and easy designer update.

How to Create a Stenciled Monogram Valance

Dress up your windows by adding a custom monogrammed valance made from a precut pine plank, ready-made drapery panel, art supplies and paint.

Customize Store-Bought Curtains With Ribbon Trim

Use fun pom-pom trim and colorful ribbons to update an inexpensive pair of ready-made curtains into a custom decoration for your dorm room.

How to Use Neckties As Curtain Tiebacks

Bring a dapper and dashing touch to window treatments with tiebacks made from patterned neckties.

More from:

Fast Fix: Bathrooms

Go Shopping

Get product recommendations from HGTV editors, plus can’t-miss sales and deals.

On TV

Follow Us Everywhere

Join the party! Don't miss HGTV in your favorite social media feeds.