An Easy Backsplash Made With Vinyl Tile
For a kitchen backsplash idea with style and a low price tag, consider vinyl tile. This project shows you how to create a backsplash design out of vinyl tiles.
- By Heidi Karpa
Filed under: Kitchen Backsplash, Kitchen Tile, Room Design, Backsplash, Kitchens, Tile, How To
E-mail This Page to Your Friendsx
A link to %this page% was e-mailed
Materials and Tools:
decorative outlet covers
tile cutter or utility knife
straight edge or ruler
safe cutting surface
extra outlet cover screws
1. Take a tour of vinyl tile available at your local home or hardware store. The variety of looks is amazing. Stay focused on peel and stick tile. This is the easiest tile to work with. Tip: Some tile options may need to be pre-ordered.
2. Bring home samples. Individual tile pieces are typically under $2 a piece. Reviewing them in your space makes the selection process much easier. Tip: The backsplash area is a perfect spot to introduce an accent color or to tie together your kitchen's design elements. Keep in mind pre-existing design elements like wood tones, metal tones and wall color.
3. Select new outlet covers. Decorative outlet covers are a great way to increase visual interest in your kitchen and maximize the effect of this project. Make a note of how many switch plates you'll need. Tip: Be sure to include switch plates with multiple switches or oversized outlet covers. Knowing this information before you go to the store allows you to purchase with confidence.
4. Depending upon the amount of backsplash area you wish to cover, one or two boxes will be all you need for the project. It's always better to have extra material on hand.
5. Purchase your new outlet covers. Purchase extra screws that fit the outlet covers but are a longer than the ones included. The vinyl tile adds additional thickness, so having longer screws available makes life easier.
6. Clean the backsplash area thoroughly. The cleaner the surface, the better the adhesive will stick.
7. Create your template. Tape craft paper or newspaper together to make a complete template of the backsplash area. Lay your completed template out on your floor. Make sure you mark on the template all switch plates and electrical outlet locations.
8. Using your template, start laying tile pieces out on top of the template. You're not adhering the tile to the template, but creating a clear understanding of how the tile pieces will be placed on the wall. This simple step allows you to maximize the visual effect of your tile and establish where cutouts are needed. Use full tiles for as much of the backsplash as possible.
9. Remove all outlet covers or switch plates before installation.
10. Using a tile cutter or straight edge and a utility knife, cut your pieces as needed to fit within the backsplash area. This process is very simple because vinyl tile is easy to cut. Tip: Having extra tile takes the stress out of making these cuts. Once all the tile is in place, install your new outlet covers.
11. Start adhering the tile toyour wall. Begin this process where the largest expanse of tile is shown. Typically this is over the sink area. Critical step: Check with a level to ensure you're adhering the tile to the wall properly.
12. Use a rolling pin to press the tiles on the wall. The added pressure makes the adhesive stick better.
Variations: There are other materials that are easy to install as a new backsplash. Cork tiles come in a wide variety of colors and are easy to cut. Pressed tin tiles are another option to review. Always review manufacturers' installation guidelines and materials lists. For more great backsplash ideas visit 8 Fresh Ideas for Kitchen Backsplashes.
Looking for something unusual to spice up your kitchen? Install a tin tile backsplash. It will take less than a weekend and...Advertisement
HGTV Kitchen & Bath Newsletter