Wooden Walkway to Home Gym
Steve Watson and the Don't Sweat It crew replace a worn out brick path with a stylish wooden boardwalk.
E-mail This Page to Your Friendsx
A link to %this page% was e-mailed
Homeowners Thomas and Aisha have a gym in their garage, but the current exterior path leading to it is made of worn pavers. The walkway itself is in disrepair and dangerous. Steve Watson and the Don't Sweat It team have just the solution in the form of a stylized wooden walkway to the gym.
Materials and Tools:
cellular PVC decking (120 sq. ft.)
pressure treated decking (80 linear ft.)
electric miter saw
1. First, clear all debris and old pavers, brick and stones.
2. Use marking spray to lay out the design and shape of the desired path. This path is roughly 33 feet long and 3 feet wide.
3. Since the path is going to curve, we put down the framing at angles then cut the decking boards to fit. First level the area by digging out any unnecessary dirt. We added weed-block fabric beneath the frames to prevent weeds growing up through the walk.
4. The framing will be roughly 30 inches wide with a center stud, and be made from pressure treated 2x4's. Once the frames are completed, we stake them down with 18" rebar. Cut all the boards and nail together using a framing nailer.
5. Cut the decking to overlap the frames and screw down with decking screws.
6. Trace the cut edge and drag the board down the length of the path. Cut along the marked line.
Top off your chimney with a decorative pot; faux wrought iron fences require no maintenance; a composite deck material with the...