How to Build Outdoor Patio Bench with Ottoman

Built-in patio furniture from Rip and Renew provides a comfy spot for outdoor lounging and entertaining.

The ottoman is pushed up against the edge of the bench to make it a relaxing chaise.

Materials and Tools:

circular saw
miter saw
drill
galvanized decking screws
staple gun
exterior-grade staples
pine boards
exterior-grade plywood

Steps:

1. Determine the size of your bench. Use a miter saw to cut the pine boards for the frames.

Figure A - Framing the bench.

2. Assemble the frame and fasten the boards with galvanized decking screws. You will need two separate side frames for each bench (figure A).

3. Cut the plywood to size to cover the frame, allow for overlapping.

Figure B - Covering the frame in plywood.

4. Attach the plywood to the pine boards using a staple gun (figure B). The plywood should cover the seat, back and sides of the frame.

5. To add a chaise ottoman, construct a rectangular frame the same height as the bench. Cover all sides in plywood except for the bottom.

6. Paint as desired.

Shop outdoor products from fire pits to outdoor furniture, planters and more

We Recommend...