Watering Can Fountain

Materials:

metal watering can
electric drill, 1-1/4" hole saw, 7/8" hole saw
8-1/2" x 10" pipe
one 1/2" x 5" pipe
one 1/2" faucet
one 1/2" rubber hose
one 1/2" pipe T
two 1/2" elbows
two 1/2" connectors
one 1/2" cap
one tabletop-size pump
one 1/2" female with end adapter
TFE paste with Teflon
safety glasses

Steps:

1. Put together the pipe, using Teflon paste to attach the pieces. Attach the faucet to the elbow, then to a 10-inch piece of pipe, then to the T, the connector, the cap, the five-inch pipe, the other elbow and the other connector (figure A).

2. Drill two holes for the pipe into the bottom and at the top of the can with a hole saw.