Paint Technique: Faux Beadboard

Room by Room : Episode RXR-1612 -- More Projects »
PHOTO

Try using paint and a squeegee to create the look of beadboard paneling.
Materials:

window squeegee
utility knife
satin paint for base coat (Doric White SW1151 )
satin paint for top coat (Roasted Almond SW1143)
paintbrushes
rollers/paint trays
painter's tape
featured ceiling paint (Landscape SW1169)

Steps:

1. Tape-off any areas not to be painted (trim/ceiling). Apply the base coat and let dry. Repeat if necessary/desired and let dry.

PHOTO

Figure A
2. Cut the squeegee to mimic the grooves of bead board paneling (figure A).
PHOTO

Figure B
3. Cut-in and roll on the top coat over a two to three foot wide area. Immediately go to the wall and pull the squeegee straight down through the paint before it dries (figure B).

4. Continue across the wall in this fashion until you reach a corner. If there isn't enough room for the squeegee, roll on more paint over the area just completed so there's room for the full width of the squeegee.

Note: The technique happens quickly so you need to move fast and may want to enlist the help of a partner.

Resources
paint - Sherwin-Williams
The Sherwin-Williams Company
Website: www.sherwin-williams.com
Also in this Episode
Room by Room : Episode RXR-1612
•Outdoor Living in Style
•Paint Technique: Faux Beadboard
•Antique-Inspired Bench