Stamped Walls

primer (SW ProBlock tinted with Tea Leaves SW1152)
paint for lower wall portion (Leatherleaf SW1167)
paint for upper wall portion (Always Almond SW1149)
ceiling paint (Dover White SW1648)
paint for stamping (Farmhouse SW2301)
stamp (specifics unavailable)
sash paintbrushes
roller/tray
pencil
cardboard
scissors
artist's brush
large level
measuring tape

1. For the wavy design, draw a level line at the desired height on the wall (taking the height of the furniture into consideration). Cut a wavy template out of cardboard and trace it around the room using the line as a guide.

2. Use a sash brush to apply the upper and lower paint colors along the wavy lines and a roller for the rest of the wall (figure A). Let dry.

3. Line the stamp up with the wave and press it in place. To get around corners, stamp the design onto a piece of paper and cut it out. Fit the paper design into the corner; trace around it, and then fill it in using a small artist's brush (figure B). Let dry.