May Day Basket Tiebacks

Decorating With Style : Episode DWS-307 -- More Projects »
Click here to view a larger image.
Add cheerful color to your draperies with May Day tiebacks.

Materials:

scissors
tin cans or glass Mason jars
Mod Podge
paintbrush
seed packets
hammer and an extra-large nail
ribbon
wired garland of greenery
flowers of your choice
cup hooks

Steps:
  1. Remove paper label from the outside of a tin can. Place nail about 1/8 inch from top lip of the can and hammer it completely through, pushing the nail out through the inside and leaving a hole in the can. Do this to other side of can as well.
  2. For a rustic, antique look, tear around (in a downward direction) the design from a seed packet to paste to the front of the can.
  3. Brush Mod Podge on the back of the seed packet and onto the can where you want to place the design.
  4. Position the design on the upright can as fast as possible after applying Mod Podge because it dries quickly.
  5. Brush Mod Podge over the entire face of the design, overlapping onto the can.
  6. Let Mod Podge dry completely.
  7. Cut the ribbon to the desired length for the can to hang. Allow enough extra ribbon length to thread through the can holes and tie in a knot with a short streamer.
  8. Thread the ribbon through the nail holes from the inside of the can to the outside and secure by knotting the ribbon just outside of the nail hole, leaving a short stream of ribbon hanging on either side of the can.
  9. Cut the streamer ends in a decorative V-shape by folding the ribbon edge to edge. Measure approximately one inch from the bottom. Let the streamers hang down or fashion a bow on either side of the can.
  10. Customize the can by placing various flowers inside. Use the can as a curtain tieback by simply looping and securing a second strand of ribbon, as before, through the nail holes. Wrap the ends of the second ribbon strand around the curtain and fashion in a knot. Secure the tie back to the wall with a nail or cup hook.
Resources
Mod Podge adhesive/sealer (Model #: CS11201- Gloss, CS11301- Matte)
Mod Podge can be used as a glue and a sealant. It is an all-in-one sealer glue and finish--gloss and matte finish. Sizes range from four ounces to one gallon.
Plaid Enterprises Inc.
Website: www.plaidonline.com
Also in this Episode