Fish Bowl Lamp

glass globe vase (or old-fashioned fish bowl) with a 3/8" hole drilled in bottom or side
desired images
scissors
small nail scissors
clear-drying water-based glue
sponge brushes
damp paper towels
several small squares of poly foam
water-based craft paint
lamp kit (including vase cap, pipe, socket, wire and base)

Steps:

1. Clean globe vase and set aside.
2. Carefully cut images out using scissors--use nail scissors or a razor blade for detailed cuts. Create additional cuts on the image to allow it to bend to the curved surface. Set aside.
3. With sponge brush, generously apply glue to inside of vase.
4. Lay the first image flat and face down on the glued surface. Gently rub it to remove air bubbles and excess glue.
5. Remove excess glue around image with a damp paper towel. Repeat process until all images are applied. Let dry.
6. Use a small square of poly foam to sponge on a thin glue layer all over the inside of the vase. This allows the paint to adhere to the surface. Let dry.
7. Use poly foam to lightly apply several thin coats of craft paint, allowing it to dry between coats. Continue until there is an opaque finish. Let dry completely.
8. Put lamp together according to directions and plug it in.