Tall Rectangular Storage Cabinets

1/2" MDF (medium-density fiberboard)
wood glue
nails
luan plywood
brad nailer
hammer
drawer pulls

Steps:

1. Cut the sides, top and bottom to the desired lengths. Glue and nail them together.
2. To add the shelves, measure the inside of the cabinet; cut the MDF to size, and then slide them into position. Secure the shelves from the side using nails.
3. Attach luan plywood to the back using small wire brads and a hammer.
4. The drawers fit inside the cabinet openings. Join the sides and back pieces together using glue and a brad nailer. The front is larger than the opening and is cut about 1/8 inch from the edge of the cabinet. Route the edges of the front piece with an angled router bit and attach it to the drawer. Secure a luan plywood bottom piece as above.
5. Drill a hole for the drawer pull. Prime and paint the piece as desired. Once dry, attach a drawer pull.