Materials:
very fine sand paper
clear Polyshrink
Stampassions apron template - TP 1007
Stampassions rubber stamps
- dragonfly - C2308
- picket fence - C2304
- garden gate - C2306
- Kindhearts phrase - D2311
heat gun
colored chalk
Xyron adhesive machine
Pulpassions purple plaid paper
scissors
3-inch length of purple plaid ribbon
hot glue
Sakura Crystal Lacquer
magnet
Steps:
1. Sand both sides of 1/2 sheet clear Polyshrink material with very fine sandpaper. Wipe clean with paper towel to remove 'dust.'
2. Trace Stampassions apron template onto sanded Polyshrink (figure A). Trace only 1/2 of the template. If making more than one magnet, sand a whole sheet of Polyshrink, trace the entire template and cut in half on score lines to make two magnets.
3. Rubber-stamp dragonfly, phrase, picket fence and garden gate (all from Stampassions ) designs onto the Polyshrink apron (figure B). Color with chalks (figure C), cut out then shrink using a heat tool (figure D).
4. Run the apron through a Xyron machine.
5. Adhere to Pulpassions purple plaid paper to the apron. Trim around the apron and press paper firmly to seal the adhesive.
6. Cut a three-inch length of purple plaid ribbon and adhere it to back of apron with hot glue.
7. Cover the front of apron with Crystal Lacquer and let dry.
8. Glue a magnet to back of apron.
)
)
)
)
)
