Faux Stone Candleholders

cement mix (smooth)
water
mixing bucket
trowel
plywood scraps and pieces of 1x4s, pre-cut to desired candle size
screws, clamps or nails
tea lights (with metal holders)
acrylic art paints in terra cotta or other stone-like colors (optional)
brushes (optional)

Steps:

1. Create some molds for the candleholders. Use squares or rectangles of plywood and 1x4s for this.
2. To assemble a mold, place a piece of the cut plywood on a flat surface and place 1x4s on top. Hold these together tightly with screws, clamps or nails.
3. Mix cement with water in bucket according to package instructions (stir thoroughly ).
4. Carefully pour some of the cement into the mold. Level off the top. Press the tea candle metal holders into surface in a grid pattern leaving some space between each.
5. When completely dry, remove the mold. Take out screws, clamps or nails from wood and lift away from dried cement. Use a hammer or chisel to take off wooden bottom , if necessary.
6. Place candles in holders and set on mantel, side table or along the middle of a dining table.
7. Optional: Water down some of the paint and brush onto the surface to create a more natural stone look. Reuse the molds if desired to make other candles.