Padded Headboard Cover

WINDOWS MEDIA VIDEO Click here for details on making this headboard.

fabric
scissors
tape measure
iron
straight pins
sewing machine or fabric glue
grosgrain ribbon
synthetic batting

Steps:

1. Measure the headboard from the top of the mattress to the top of the headboard . Double that amount and add a few inches for seams. Then measure the headboard width and add a few inches for seams. Cut two pieces of fabric to these measurements for the front and back.
2. Cut ribbon into eight 18-inch lengths. Spread one piece of fabric on a flat surface right side up. Glue the ribbon pieces to the edges where desired, depending on the headboard shape.
3. Place second fabric piece right side down on top of the first so the ties are between the two. Pin the pieces together and sew or glue them along the top and sides (leave the bottom end open).
4. Turn fabric right sides out and press seams with hot iron.
5. Cut batting a bit smaller than the finished cover. Place batting inside cover , smoothing it until it's flat.
6. Fold under raw edges of fabric and press seam in place. Sew or glue the seam closed.
7. Place padded cover over headboard so it hangs evenly in front and back. Tie ribbons to secure along sides.