HGTV.comHGTV.com

The Easiest Wood Paneling in the World

Jonathan Fong shares the steps for adding warmth to your walls with balsa wood.

Click here for a larger image
8. Apply Tape
« 7. Polish with Steel Wool | 9. Stick the Wood to the Wall »
On the back of each piece of wood, place a strip of tape on the left and right sides. It's not necessary to line both sides the entire length of the board, however, if a particular panel happens to be warped, a long piece of tape will help keep it from jutting out from the wall. If the panel lies flat, all you will actually need is a one-inch piece on each corner, plus a one-inch piece on each of the sides.


1. Create a Diagram

2. Trim the Wood

3. Number Each Panel

4. Wipe Off Dust

5. Apply Wood Conditioner


6. Apply Two Coats of Stain

7. Polish with Steel Wool

8. Apply Tape

9. Stick the Wood to the Wall

10. Install One Row at a Time
HGTV.com
Services Popular Content About
Our Sister Sites

Comparison Shop for Home Decor & Garden Tools at Shopzilla & BizRate

UpMyStreet and uSwitch.com provide UK comparison services.

© 2008 Scripps Networks, LLC. All rights reserved.