Cosmic Spirals

32. Select fabric gradations for the radiating spiral (figure P).

33. Begin in the center and position the first two fabrics together. Tip: Sections are so small in the center that you can cover three or four sections with one fabric (figure Q).

34. Repeat the foundation piecing process (figure R) above (same as black and white spiral).

35. The last piece of the spiral (end) will be machine appliquéd (figure S).

Combining the Spiral and the Radiating Section

36. Pin the two spirals together, easing each end together, as you pin (figure T). Tip: Turn the center spiral (gradation) edges under and glue with repositionable glue prior to pinning the two spirals together.

37. To achieve perfect points, as the spirals are machine-appliquéd together, open and close the points with a stiletto (figure U). Note: Points can be opened and closed because you did not sew into the seam allowance.

38. Machine-appliqué the pinned spirals together with a blanket stitch using invisible thread.

39. Remove the Sulky foundation carefully and press.