HGTV.comHGTV.com

"Burning Bush" Fire Pit/Cocktail Table

Irene Juliette Deely welds steel into her combination "Burning Bush" fire pit and cocktail table.

That's Clever! : Episode HCLVR-319 -- More Projects »
Click here for a larger image
Step 7
« Steps 4-6 | Step 8 »
7. Cut 3/8-inch pipe and 1/4 inch rod to fit one side of the door edge. Cut the pipe into sections and thread it onto the rod. Spot-weld alternating sections of pipe with the rod inserted to the door. Spot-weld pipe sections not welded to the door to the framework created in the trunk in step 3. Cut two sections of 1/2-inch rod to fabricate the handle and weld the rod to the door.


"Burning Bush" Fire Pit/Cocktail Table

Step 1

Step 2

Step 3

Steps 4-6


Step 7

Step 8

Step 9

Step 10

Step 11


Step 12

Step 13

Step 14

Step 15

Step 16


Step 17

Step 18

Irene Deely


Also in this Episode
That's Clever! : Episode HCLVR-319
•Magnet Recipe Board
•Suspended Glass Panel
•"Burning Bush" Fire Pit/Cocktail Table
•Fused Glass Light Switch Cover
HGTV.com
Services Popular Content About
Our Sister Sites

Comparison Shop for Home Decor & Garden Tools at Shopzilla & BizRate

UpMyStreet and uSwitch.com provide UK comparison services.

© 2008 Scripps Networks, LLC. All rights reserved.