Materials: 16 square feet of 18-gauge cold rolled mild steel
14" x 12" of 10-gauge hot rolled mild steel
Famowood Glaze Coat pour-on high gloss epoxy
POR-15 Glisten PC two-part marine epoxy paint
Metal Finishes Plus copper plate acid
Metal Finishes Plus brown tarnish
Metal Finishes Plus copper insta-rust
Metal Finishes Plus rust arrest
acetone
black permanent marker
2" disposable paintbrushes
respirator, goggles, safety glasses, face shield, rubber gloves
cardboard
sheet metal snips
clamps
TIG welder
1/16" mild steel filler rod
MIG welder
plasma-arc cutting torch
air compressor
hand held propane torch
box-and-pan hand brake
angle grinders with 80- and 50-grit disks
orbital sander with 80- and 120-grit disks
ball peen hammer
)
