"The Surf Front" Hand Sculpted Birdhouse

6. Place the birdhouse on a piece of wood for the base and trace around the bottom of the birdhouse. Then mark an oval for the outside of the base. Cut out the hole indicated by the bottom of the birdhouse. Cut out the outside oval shape. Attach the base with wood glue and brad nails (figure E). Round the edges of the base with a grinder or sander.

7. Cut and carve the awnings, porch posts, surfboards and peak trim with a scroll saw and a flex shaft carving tool.

8. Nail and glue all awnings, columns (figure F) and ginger bread (figure G) sections to the house.

9. Carve out the windows and doors with a flex shaft.

10. Drill the hole for the bird entrance and perch in the top front part of the birdhouse (figure H).

11. Prime all parts of the birdhouse with latex primer. While the primer is still dry, sprinkle sand on the base so it sticks to the primer (figure I). Let dry.

12. Paint the birdhouse details such as the vertical lines, the surf shop sign, and moldings using desired colors of latex paint (figure J).

13. Measure and cut aluminum flashing for the roof, adding about an inch all around to bend the sharp edges under. Bend the bottom ends with square pliers to form gutters. Cut pieces of copper tubing for the downspouts.

14. Attach the aluminum pieces to the roof using nails. Bend the sharp edges of the aluminum flashing under and attach the aluminum flashing to the wood roof with 3/4-inch wire nails overlapping the gutters (figure K).

15. Punch a hole in the gutter with a screwdriver and insert the copper tubing into the hole with wire nails. Bend the tubing at the end to resemble a downspout (figure L).

16. Drill two holes in the peak of the roof through the dowel underneath and insert a bent piece of metal tubing.

17. Turn the birdhouse over and bend the metal tubing over so the hook will not pull out when the birdhouse is hung. At the same time attach the wooden bottom with the hole to the bottom with screws. This will sit on the pieces installed earlier.

18. Texture the main roof and porch roof with latex caulking (figure M).

19. Paint the roofs with brown latex paint (figure N) and let dry.

20. Slant the painted surfboards against the side of the "The Surf Front" hand sculpted birdhouse and attach with wood glue (figure O). Attach the beach ball with wood glue to the base (figure P).

Website: www.bradfordsweet.com