Tool Time Clock

11. On the back side, fill each 'pool' just to the top level (do not overflow area) with hot glue and allow to cool.

12. Wrap the metal around the foam core board folding flaps to the back of board.

13. On the front side, at the center mark, punch a hole through the metal and foam core with the Clikit. Be sure to work over a protected surface.

14. Enlarge the hole (not too large) for the clock shaft to fit snugly, by twisting and rotating the pencil.

16. Secure an 8-1/4 inch square of felt to the back side of the clock. Punch or cut an opening in felt the same size as clock shaft using the Clikit tool or a craft knife.

18. Secure these tools to the clock hands with tacky glue and allow to dry.

19. Punch or cut holes through the paper layers, the same shape and size as the clock hand holes with the Clikit.

20. Assemble the clock components to complete your tool time clock! Follow clockwork manufacturer's instructions for assembly.