Garden Lattice Wall Hanging Host Renai Ellison explains how to use ordinary garden lattice to create an enchanting wall hanging.
Materials:
lattice
measuring tape
wood molding with dado (crevice)
drill
wood screws or nails
coarse sandpaper
white spray primer
clear glaze
lime-green latex paint
medium-size paintbrushes
burnt sienna glaze
collectibles or accent pieces
decorative ribbon
Steps:
- Measure lattice for dimensions and cut accordingly.
- Cut molding to make a frame for lattice, and miter the corners.
- Place lattice in frame. Use wood glue to secure the frame first, then nail or screw together the corners.
- Use coarse sandpaper to thoroughly smooth all rough edges and surfaces. Clear off all excess dust and shavings.
- Spray the entire piece with white primer. Two or more coats may be needed.
- Mix the clear glaze and green paint, and apply a generous coat. Take care to get paint in all corners and crevices of the unfinished portion of the lattice.
- Highlight the edges of the molding frame with the burnt sienna glaze, taking care not to over-apply, then smooth it out with a cloth for a more subtle appearance (figure A).
- Hang collectibles, accent pieces or other items with decorative ribbon or twine (figure B).
- Attach photo-hanger brackets to the back of the frame if you intend to hang it.
)
)
)
