HGTV.comHGTV.com

Riveted Silver Necklace

Lisa Crowder creates every part of her riveted necklace with sterling silver.

That's Clever! : Episode HCLVR-348 -- More Projects »
Click here for a larger image
Steps 5-8
« Steps 3-4 | Steps 9-10 »
5. Center punch the bar at the marks and drill holes using the flex shaft and appropriate drill bit.

6. For the bottom bar mark where the four dangles will be placed, center punch and drill.

7. Punch out six 3/8-inch discs from 26-gauge silver using a small chasing hammer and a disc cutter.

8. Once the discs are cut, sand both sides using 320-grit first and then 400-grit.



Riveted Silver Necklace

Steps 1-2

Steps 3-4

Steps 5-8

Steps 9-10


Steps 11-13

Steps 14-15

Steps 16-22

Steps 23-26

Step 27


Steps 28-29

Steps 30-32

Step 33

Steps 34-36

Steps 37-38


Steps 39-40

Lisa Crowder


Also in this Episode
That's Clever! : Episode HCLVR-348
•Encaustic Picture-Gram Card
•Etched Aluminum Bowl
•Riveted Silver Necklace
•Aluminum Wine Bottle Charm
HGTV.com
Services Popular Content About
Our Sister Sites

Comparison Shop for Home Decor & Garden Tools at Shopzilla & BizRate

UpMyStreet and uSwitch.com provide UK comparison services.

© 2008 Scripps Networks, LLC. All rights reserved.