HGTV.comHGTV.com

"Morning" Colored Titanium Pin

E. Douglas Wunder colors titanium with electricity to design his "Morning" pin.

That's Clever! : Episode HCLVR-339 -- More Projects »
Click here for a larger image
Steps 12-14
« Step 11 | Step 15 »
12. Flux the silver back piece of the brooch, then place a pin catch and pin joint into position. Cut pieces of wire solder and place them by each finding. Heat the torch to melt the solder and secure the joint and catches in place. Place the part in the pickle for ten minutes.

13. Cut 15 pieces of 18-gauge titanium round wire into 3/4-inch pieces with flush cutters. These will serve as the rivets.

14. Cut 15 pieces of silver tubing into 3mm (millimeter) pieces with saw and tube cutter. These will serve as the spacers between the top and bottom of the brooch.



"Morning" Colored Titanium Pin

Steps 1-2

Step 3

Step 4

Step 5


Steps 6-7

Steps 8-9

Step 10

Step 11

Steps 12-14


Step 15

Steps 16-18

Steps 19-21

E. Douglas Wunder

Also in this Episode
That's Clever! : Episode HCLVR-339
•Enameled Eucalyptus Bowl
•Hawaiian Fern Table Runner
•"Morning" Colored Titanium Pin
•Sea Blue Turtle Visor
HGTV.com
Services Popular Content About
Our Sister Sites

Comparison Shop for Home Decor & Garden Tools at Shopzilla & BizRate

UpMyStreet and uSwitch.com provide UK comparison services.

© 2008 Scripps Networks, LLC. All rights reserved.