Dress up your windows by adding a custom monogrammed valance made from a precut pine plank, ready-made drapery panel, art supplies and paint.Brian Patrick Flynn, Decor Demon
Use measuring tape to determine proper measurements above window for installing valance. Jot measurements down on notepad using pencil. Tip: An excellent valance height for windows in rooms with 8 to 10-foot ceilings is 10 inches with a depth of 6 inches.
Referring to measurements taken with pencil and notepad, have 1-by-10-inch pine plank cut to size at local home improvement store. Using drill and 2-inch wood screws, assemble precut planks of pine into a three-sided box.
Unfurl batting out along flat, level surface. Next, place valance box along the top, then cut to size using scissors.
Wrap valance box with batting, then attach along the interior of the box with staple gun.
Place yardstick directly on top of fabric or drapery panel. Based on overall height and depth of valance box, cut fabric or drapery panel to size using scissors.
Hang cut fabric or drapery panel along a door or drapery pole, then use steamer to remove all wrinkles.
Wrap the cut fabric or drapery panel around valance box, then secure along interior using staple gun. Tip: To ensure staples are not visible when looking up into valance once installed, staple the fabric approximately 3 inches up inside of the box.
To create a custom monogram stencil, place scratch paper on top of cutting mat, then sketch monogram with pencil.
Place clear acetate alternative directly on top of the sketch paper. Next, trace monogram directly to clear acetate alternative using marker.
Use retractable utility knife to cut monogram stencil from clear acetate alternative.
Center monogram stencil along face of valance. When using spray paint, position can directly above stencil, aiming straight down. Keeping the can of spray paint approximately 8 inches from the surface of the fabric, apply even coats by moving back and forth in a slow, controlled manner. For fabric paint and stencil brush application, dab stencil brush into paint, then dab directly down onto stencil. Allow paint to dry for at least 30 minutes before removing stencil.
Secure L-bracket to wall using screws. Next, place valance up into L-bracket, securing it in place from above with screws.