No mantel? No worries — Santa will be sure to stuff your stockings when they're hanging from this clever faux mantel wall hanging made from a drop cloth, drapery hardware and chalkboard paint.Brian Patrick Flynn, Decor Demon
Use iron to remove all wrinkles from drop cloth (Image 1). Next, create a rod pocket by folding the drop cloth's top down approximately 1/2", then use iron-on adhesive tape and iron to fuse the two portions of the drop cloth together (Image 2).
Insert thin-profile drapery rod into the rod pocket and attach finials to each end (Image 1). Add a hanger with twine by knotting it onto each end of the rod (Image 2).
Most canvas drop cloths are extremely porous, so it's important to prime it before applying chalkboard paint to reduce the number of coats needed. Using a paint roller, add an even coat of primer, leaving a two-inch unpainted border around the edges.
Use a paint roller to apply two even coats of chalkboard paint on top of the primed area. Tip: Leaving a two-inch unpainted edge will add a contrasting border to your wall hanging, framing it nicely.
Use chalk to draw the silhouette of a mantel (Image 1). Add visual interest by giving your mantel architectural ornamentation such as friezes or moldings (Image 2). Once the mantel is complete, add burning logs to the mantel's opening with chalk (Image 3).
Hammer a picture-hanging nail into wall. Hang the drop cloth mantel by placing the knotted twine on the nail, moving the drapery rod back and forth until it sits perfectly level (Image 1). Place S-hooks or stocking hooks over the drapery rod, then hang up stockings (Image 2).