Click to Print
HGTV.com

http://www.hgtv.com/handmade/metallic-copper-gold-and-silver-pumpkins/index.html

Metallic Copper, Gold and Silver Pumpkins

Give faux pumpkins a glamorous makeover with gold, silver and copper leaf. They'll add just the right amount of sparkle to a fall display or Thanksgiving centerpiece.

Marian Parsons, Mustard Seed Interiors

Materials Needed:

  • faux pumpkins
  • 1 package each of copper, silver and gold leaf
  • leaf adhesive
  • 1" artist brush
  • 2" chip brush or soft bristled brush
  • decorative upholstery tacks

Apply Adhesive

Using a one-inch artist brush, apply leaf adhesive to entire surface of pumpkin, except stem. Allow to dry until adhesive is clear and tacky. Tip: Use a thin coat and brush over adhesive after about 10 minutes of drying time to prevent drips.

Apply Metallic Leaf

Working from the top of the pumpkin down, gently apply full sheets of desired metallic leaf to entire surface of pumpkin, except stem. Smooth down the leaf with your fingertip or a chip brush. Repeat this process until all raised areas on the pumpkin are leafed.

Fill Gaps and Buff

Once leafing is applied to raised areas of the pumpkin, use your finger or a brush to push small pieces of leaf into recesses. Once pumpkin is entirely covered in leaf, buff with chip brush in circular pattern to remove excess pieces of leaf that didn't quite adhere. The brush attachment on a vacuum is also a great way to remove excess leaf.

Add Decorative Tacks

For additional interest, add decorative tacks in desired pattern. They can usually be located at craft and sewing stores with the upholstery supplies. Simply press tack gently into pumpkin with a fingertip. Tip: Tacks can be placed in geometric patterns like stripes or chevrons and would also look great in a monogram or spelling out a seasonal word.

Advertisement will not be printed