Glue two vintage postage stamps to glass to create this old-fashioned pendant necklace.
Jewelry designer Cyndi Hall of Boise, Idaho, demonstrates how to create this chic vintage stamp pendant. No stamps? Substitute with a similar, smaller image.
1. Roll the glass cutter in cutting oil. Score two pieces of 1" x 1" thin clear glass. Break away the pieces along the scoring lines.
2. Apply adhesive to the backs of the two stamp images using an adhesive roll. Place the glued images between the two pieces of glass, setting them back-to-back so the fronts of the images are touching the glass pieces.
3. Apply silver foil around the edges of the two glass pieces to hold them together.
4. Press out any creases or sharp edges in the foil with a burnishing tool.
5. Apply flux with a paintbrush to the silver foil to bond the solder.
6. Hold the foiled glass pieces with a 3rd Hand clip stand. Using a 100-watt soldering iron and silver lead-free solder, melt a thin layer of solder over each side of the pre-fluxed foil. Clean the soldering iron with a wet sponge frequently.
7. Sand any rough edges and corners very lightly, being careful not to over sand.
8. Solder the 6mm jump ring to the top of the vintage stamped pendant set in glass.
9. Add a purchased necklace chain by attaching it to the jump ring.