Make a tote bag with that most versatile of do-it-yourself material — duct tape.
Materials and Tools:
colored duct tape
cutting board and utility knife
Duct Tape "Fabric"
1. Find a flat work surface, such as a cutting board, floor or old table. Place a strip of tape with the sticky side down.
2. Place another piece of tape, sticky-side down, beside it, overlapping each other by 1/2 to 1 centimeters. Continue with additional strips of tape (Figure A).
3. Flip the sheet over so the sticky side faces up. If two adjoining strips separate when you are pulling up to flip the sheet, lower the sheet back down and place a strip of tape over the tear to attach them together.
4. Place a second layer of duct tape strips sticky side down, covering the sticky-side-up pieces (Figure B). This is your finished side.
1. Cut out the body, side pieces and handles for the tote using the duct-tape fabric you just created (Figure C).
2. Fold the body piece over onto itself so that the finished sides face inside.
3. Staple side pieces to body piece, leaving the top open and a quarter-inch seam allowance (Figure D). You may need to cut notches out of the side pieces if creating a curve.
4. Cover the staples with small pieces of duct tape (Figure F).
5. Turn your creation inside out.
6. Center the handles on the sides of the purse. Attach with staples (Figure G).
7. Cover the exposed staples with small pieces of duct tape (Figure H).
8. Decorate your tote bag creation or leave it plain (Figure I).
Options - Add strips of color, stickers or a cut-out appliqué. Following are two methods to create an appliqué. You can use one or several colors of duct tape.