Click to Print

Dichroic Glass Pendant with Stringer Design

Robin Nunes from Madison, Ohio, taught herself the art of fused glass. In this project, Robin creates a dichroic glass pendant embellished with flame-worked black glass stringers.

Materials and Tools:

tested compatible fusing glass: clear, green/magenta dichroic
black stringer
glass glue
silver bail
needle nose pliers
heat-resistant surface


1. Cut a piece of clear glass to 1/2" x 1-1/2". Clean the clear glass and place in the kiln.

2. Cut a piece of dichroic glass 1/2" x 1-1/2". Clean the dichroic glass. Place on top of the clear glass, coated side up.

3. Using pliers and a torch, heat a black stringer. Pull the stringer into tiny threads. Place the threads on the dichroic glass in a pleasing design.

4. Fire according to the firing schedule suggested by the glass manufacturer.

5. When cool, use glass glue to attach the bail to the back of the pendant.

Advertisement will not be printed