HGTV.com
Click to Print

http://www.hgtv.com/home-improvement/hanging-crown-molding/index.html

Hanging Crown Molding

Simple, one-piece crown molding adds dimension and style to any room.

Materials and Tools:

tape measure
calculator
small paint roller and mini roller pad
paint tray
chop saw (miter saw)
finish nail gun and nails
caulking gun
door casing or other flat molding (we used 2-1/4”x5/8” medium-density fiberboard (MDF) casing)
paint (we used Olympic brand paint in black, off the shelf rather than a custom color)
wood glue
light weight spackle (we used Dap brand Fast ‘N Final lightweight spackle)
thin rubber (neoprene) gloves
clean damp rags
painter’s caulk

Steps:

1. Determine how much molding you need by measuring all of the walls of the room. Add an extra 10 percent to allow for cuts and waste.

2. Paint all of your molding. It’s easier and quicker to paint before the molding goes up.

3. Cut the molding on the chop saw mitering the corners to 45-degrees. If the wall is longer than the length of your molding, cut an outwardly facing miter so that you can join the boards together. It’s also a good idea to glue all of the mitered joints so that they don’t pull apart later and crack the paint.

4. Once cut and glued, nail all of your pieces in place along the top of the wall. Start on the wall most visible. Try not to use any pieces less than three feet in length to avoid a choppy appearance.

5. Fill all nail holes with light-weight spackle using your fingertips. Wipe smooth before it dries.

6. Caulk the joints and any gaps between the wall and ceiling with painter’s caulk. Smooth down the caulk with your fingertips and wipe away any excess.

7. When the spackle and caulk are dry, touch-up the paint for a perfect finish.

Advertisement will not be printed