HGTV.com
Click to Print

http://www.hgtv.com/home-improvement/coffered-ceiling/index.html

How to Create a Coffered Ceiling

A coffered ceiling adds Old-English style to a home office.

Materials and Tools:

safety glasses
pencil
tape measure
miter saw
2x4 lumber
chalk line (snap line)
nail gun
wood glue
1/4-inch oak
molding
stain
paint brushes
clean cloths

Steps:

1. Stain all your oak wood and your interior molding. First coat with a paint brush and then wipe with a clean cloth to expose the wood grain.

2. Determine the layout of the ceiling grid. Make sure the longest beams will run parallel to the ceiling joists so they will be properly supported.

3. Use a chalk line to draw the grid on the ceiling.

4. Measure the length and width of the grid and cut the 2x4s down to the appropriate sizes.

To start, a grid is created with 2x4s.

5. Fasten the 2x4s to the ceiling along designated lines.

6. Measure the length for the finished pieces of oak and cut to size. In most designs, the vertical pieces sit slightly lower than the horizontal pieces.

The beams are then wrapped in finished oak and molding.

7. Attach the finished pieces of oak to the 2x4s using a nail gun.

8. Measure the length needed for the interior crown molding of each box. The molding will cover the joint where the vertical piece meets the ceiling.

9. Cut to size and fasten.

Advertisement will not be printed