HGTV.com
Click to Print

http://www.hgtv.com/home-improvement/weekend-projects-build-a-radiator-cover/index.html

Weekend Projects: Build a Radiator Cover

Turn an ugly radiator into a functional piece of furniture. It will take less than a weekend to make and cost less than $100 in materials.

Tools and Materials:
plywood
circular saw and table saw
small handsaw
sandpaper
primer, paint and paintbrush
wood glue
nail gun and nails
molding
silver or gold metal screening
tin snips
screw gun and screws

Steps:
1. Take into account the architectural style of your home when choosing a design for your radiator cover. You may want it to blend into the decor of your home.

2. Mark the design for the radiator cover’s face onto the plywood. Use a circular saw and if necessary, a hand saw to cut the design.

3. Sand and rough edges after cutting.

4. Cut the radiator’s two sides and the top from the plywood. Cut a two-inch gap at the bottom of the sides so the heat from the radiator can escape.

5. Attach all the pieces with glue and a nail gun.

6. Add molding along the top edges using glue and the nail gun. We added a 2x1 piece of poplar around the top then added a piece of skinny molding on top of that for a layered look.

7. Prime and paint the cover and let dry completely.

8. Cut the metal screen to size using tin snips. Attach the screen to the backside of cut-out design with some screws.

9. Place the cover over your radiator.

Advertisement will not be printed