Materials:latex satin base coat paint (Peartint SW1402)
latex satin paint (Agold SW1404, Savannah Green SW1406, Settler's Coat SW1112)
paint rollers
joint compound
pail
paintbrushes (4" flat edge, 2-1/2" sash brush)
rags
clear satin latex faux painting sealer
Steps:
1. Apply the base coat and allow it to dry for 24 hours.
2. To create texture, put joint compound into a pail and add some of the base coat color. Mix until it's the consistency of brownie batter, and then dip a four-inch flat-edge brush in. Create soft fan shapes like those of a stucco finish--some areas will get covered very well and have a lot of texture and other areas won't. Let the compound dry for at least 24 hours.