Before: Boring Old Console Table
It took less than 30 minutes of perusing craigslist.com to come across a well-made console table that was looking for a new home. (Cost: $75)Photography by Philip Friedman, Created by: Anthony Santelli
After: Presto Chango!
With its long, slim top and lower shelf, the table could quickly be turned into a kitchen workstation one that wouldn't take up much space. This makeover didn't require major construction skills, just some savvy shopping for a new surface for the top, hardware, casters and paint. (Cost: $265) See how they did it with this step-by-step guide.Photography by Philip Friedman, Created by: Anthony Santelli
To make it a functional food prep space, it needed a new top. This one had 1/2 inch-thick polyethylene (a common material for cutting boards) cut to the dimensions of the console's top ($66 for a 48-inch-by-16-inch) piece, cuttingboardcompany.com). You can also try butcher block, granite or marble, but they cost more.Photography by Philip Friedman, Created by: Anthony Santelli
Color and Casters
The entire table was primed and then painted with a semigloss latex, which can be wiped down in case of food splatters. After it dried, casters were added to the bottom of each leg. (Paint Color: Edamame by HGTV HOME by Sherwin-Williams)Photography by Philip Friedman, Created by: Anthony Santelli
On one end of the table, a wall pocket ($20, www.containerstore.com) was screwed into the apron of the table. The pocket is great for holding cookbooks, magazines or a cookbook stand.Photography by Philip Friedman, Created by: Anthony Santelli
Cushion With Cork
A cork shelf liner was cut to fit the interior of the drawer. This helps cushion knives, peelers and other utensils stashed in there.Photography by Philip Friedman, Created by: Anthony Santelli
A curtain rod was mounted using the hardware it comes with, between the legs at the table's end opposite the wall pocket. Then S-hooks were hung from the rod for utensils.