Click to Print
HGTV.com

http://www.hgtv.com/bathrooms/updating-a-bathroom-vanity/index.html

Updating a Bathroom Vanity

Give a fresh new look to an old vanity with a little paint and some elbow grease.

Layla Palmer, The Lettered Cottage
Gray Vanity with Backyard View

Materials Needed:

  • 2" paintbrush
  • high-adhesion primer (preferably one that's engineered specifically for baths)
  • semi-gloss, latex paint
  • non-yellowing, water-based polyurethane
  • sanding block
  • 80-grit sandpaper
  • screwdriver (Phillips or flathead, depending on the type of screws on the vanity)
  • new door and/or drawer pulls (optional)
  • new faucet (optional)

Clean It Up

Wipe down the vanity with a damp cloth and allow it to dry completely.

How To Update a Bathroom Vanity: Step 1

Remove Hardware

Using the appropriate screwdriver, remove all door and drawer pulls from the vanity. It's also a good idea to remove the doors and drawers from the vanity because they'll be easier to paint if they're lying flat.

How To Update a Bathroom Vanity: Step 2

Sand It

Using a sanding block wrapped in sandpaper, lightly sand the entire surface of the vanity, including the fronts of all doors and drawers. Move in the direction of the wood grain to minimize the appearance of fine scratches. Once the cabinet, doors and drawer fronts are sanded, wipe them all with a damp rag and allow each piece to dry completely.

How To Update a Bathroom Vanity: Step 3

Prime It

Coat the entire vanity and all door and/or drawer fronts with a high-adhesion primer specifically engineered for bathroom cabinetry. Move in the direction of the wood grain, using long, smooth strokes. Watch for drips, and when finished, allow to dry.

How To Update a Bathroom Vanity: Step 4

Paint

Coat the entire vanity and all door and/or drawer fronts with two coats of semi-gloss latex paint.

How To Update a Bathroom Vanity: Step 5

Distress the Edges

For a cottage-style look, use the sanding block to lightly distress the edges of all of the doors and/or drawer fronts.

How To Update a Bathroom Vanity: Step 6

Seal the Finish

To protect the new paint job, coat the entire vanity and all doors and/or drawer fronts with a layer of non-yellowing, water-based polyurethane.

Attach Doors, Drawers and Hardware

Re-attach the doors, drawers and hardware using the appropriate screwdriver. If the hardware on the vanity is outdated, consider replacing it with updated knobs or handles. Most home improvement stores carry a wide variety of hardware to choose from, and switching them out is a quick, inexpensive way to update the look.

How To Update a Bathroom Vanity: Step 8

Replace Faucet

If the faucet could use an update, replace it with one that coordinates with the new style of the vanity.

How To Update a Bathroom Vanity: Step 9
Advertisement will not be printed