Create this festive piñata using simple materials and brilliant colors. You may not want to smash it after you finish this easy project.Kristin Guy, The Cuisinerd
Remove all four flaps from cardboard box. Set aside.
Remove all four flaps from cardboard box. Set aside. With a pencil or chalk, create the outline of a donkey and cut along the outline. Make sure to cut through both sides of the cardboard box.
To create braces for the structure, glue 4 toilet paper roll tubes upright with craft glue. Make sure to space them evenly from head to tail. Apply glue to the tops of the tubes and place second cutout on top. Let dry completely (images 1 and 2).
Measure the space between two cardboard sides — approximately 5 inches (image 1) — and cut strips from the cardboard flaps previously set aside. Attach strips between both sides of the piñata and secure with masking tape (image 2).
At the top of the piñata, leave a gate open and attach rope for hanging. Fill with treats before sealing with tape.
Trace a circle onto poster board using a large bowl. Cut it out and then cut into two halves. Twist to form a long cone (image 1), and secure them with packaging tape. Attach to piñata's head (image 2).
Take two pieces of tissue paper and wrap the bottom of the piñata's feet, securing with masking or packing tape.
Take 2 to 3 feet of crepe paper at a time and fold into fourths. Cut strips, leaving a seam on one side.
Apply craft glue on the seam and attach fringe one layer at a time, starting at the bottom of the legs and working your way up to the piñata's neck (image 1). To create a saddle, drape crepe paper along the sides, filling in as needed (image 2).
Once the piñata is covered up to the neck, change directions and wrap the head starting at the nose.
Trim any longer streamers under the nose and neck as needed (image 1). Once you reach the top of the head, continue to wrap fringe up the ears starting at the base (image 2). Draw two eyes on remaining poster board and attach with craft glue.