Use this guide to learn the ins and outs or mowing your lawn, including the various types of tools that work best for maintaining your outdoor space.
Mowing is the most important maintenance job that your lawn requires. Regular mowing encourages healthy new growth and a strong root system to combat drought. It reduces a build-up of pests and diseases, and prevents weeds from seeding in the lawn and flowerbeds. Most importantly, a neatly mown lawn can improve the entire garden and make it look beautiful.
Spring and Fall:
Utility Lawn: 1 inch (25 mm), once a week
High Quality Lawn: 3/8 to 1/2 inch (8 to 10 mm), once or twice a week
Utility Lawn: 1/2 to 1 inch (15 to 20 mm), once a week
High Quality Lawn: 1/4 to 3/8 inch (7 to 8 mm), up to three times a week
Utility Lawn: 1-1/4 inch (30 mm), as necessary
High Quality Lawn: 1/2 inch (15 mm), as necessary
Mowing should be done regularly. It's best to remove small amounts of grass often rather than a lot in one cut. When mowing, start by cutting the outside edges first and then mow in straight lines up and down the center. At the ends where the mower is turned, it is worth leaving a double width strip. When the center is finished, these ends should be mown again to tidy up any missed patches — this is known as the "finishing strip." Alternate the direction in which you cut the lawn each time. Otherwise ridges can form, particularly if you are using a mower with an attached roller. Consider mowing the lawn diagonally — this gives a neat finish and is an attractive alternative to going up and down its length. Another interesting alternative is to create a curved line which can be useful when mowing around curved flowerbeds, ponds, and circular patios.
There are essentially two types of lawnmowers, giving two different types of cut: rotary and cylinder. With both kinds it is essential that the blades are kept sharp and are balanced properly, otherwise they will cut badly, leaving ragged tips on the blades of grass and making the lawn susceptible to disease. Mechanical mowers and string trimmers should be serviced once a year if they are to give their best performance.
The rotating blades slash through grass at high speed. Rotary mowers don't usually give as fine a finish as cylinder mowers, but those with rollers attached to the back give a perfectly adequate cut and create attractive stripes. Mowing heights are usually easy to adjust.
With a cylinder structure that sits horizontal to the ground, this mower has a series of blades that spin, cutting against a static bottom blade. It gives a fine cut and is suitable for formal lawns or sports surfaces where a high-quality finish is required.
These are useful for cutting areas of long rough grass or for use on banks that are too steep for a mower. They operate by cutting with nylon strings, which spin at high speed. String trimmers often give a poor finish, leaving ragged tips that eventually turn brown and die back.
Cutting a lawn regularly means there is no shortage of grass clippings to add to the compost heap each week. Small quantities should be added to the heap in alternate layers with other garden material since the clippings are very high in nitrogen and can turn slimy and smelly if left in bulk. Carbon-rich compost, such as woody material, cardboard, or shredded newspaper, should be added to the pile as well; this will counterbalance the nitrogen from the clippings. The heap should be turned every few weeks to get air circulating inside the compost — this aids the breakdown of the material and will speed up the process. Remember that clippings decompose better if they have been allowed to dry out first.