Elegant Room Divider

Room screens can be customized to match any room of the house. Figure A Figure B

2 window frames
sandpaper
damp cloth
gold paint
decorative paper
cardboard or illustrator's board
illustrator's cutting blade
spray adhesive
staple gun
drill and bit
brass hinges

Steps:

1. Lightly sand the window frames to remove splinters and clean them with a damp cloth to get rid of dust or dirt. Paint the frames gold and let dry.
2. Mark and cut cardboard and paper to match the dimensions of the windowpanes ( figure A). Use spray adhesive to attach the paper to the cardboard
3. Cut the paper along the panel's edges to get an even line. Set the panel in the window on the backside and use a staple gun to secure it in place (figure B).
4. Repeat this process for each windowpane.
5. Drill starter holes at the top and bottom of each window and attach hinges at either end.