Stocking Ladder Builds Up Christmas
No mantel? No problem. Build this simple ladder to hold your stockings near the fireplace in style.
E-mail This Page to Your Friendsx
A link to %this page% was e-mailed
1 8' x 2" x 3" piece of lumber
4' closet dowel (1-3/8" diameter)
tack cloth or rags
1-3/8" spade bit
two 28-inch bungee cords
faux metal and patina glaze
faux weathered crackle glaze
red flat latex paint
blue painters' tape
1. For the stiles (side pieces), cut the 2" x 3" lumber into two equal four-foot pieces. Use sandpaper to remove any rough spots and round the corners.
2. Cut the dowel into three pieces - one 15 inches long, one 14 inches and one 13 inches long.
3. Make three equal marks with pencil where the rungs will go on both of the stiles. One mark will be in the center and the other two will be of equal distance between the ends and the center.
4. Mark 1/2 inch on the spade bit with blue painters' tape for a depth gauge. Drill the six marks on the stiles to the 1/2-inch mark on the spade bit to create holes for the ladder rungs. Sand all the pieces and remove the dust with a tack cloth or damp rag.
5. Use wood glue to secure the three rungs (put the 15-inch piece on the bottom, then the 14-inch then the 13-inch at the top). Hold the ladder together with bungee cords and allow to dry.
6. Apply two coats of the metal glaze, allowing it to dry between layers. Once dry, apply crackle medium according to the manufacturer's directions.
7. Paint the ladder red and let dry thoroughly. The cracks will slowly appear, creating an aged look.
Bring a tropical touch to your Christmas decor with these elegant angels.