How to Make a Wood Pallet Dog Bed
Give your furry friend a comfortable spot to sleep using reclaimed shipping wood pallets.
E-mail This Page to Your Friendsx
A link to %this page% was e-mailed
Cut and Attach Fascia Board
Measure and mark side boards using measuring tape and a carpenter's pencil, then cut front fascia board to length of the front edge from side to side. Install front fascia to side panels with finish nails or screws using a drill or hammer.
Install Base Planks
Attach planks to the base's underside with finish nails or screws using a drill or hammer. Tip: Make sure the planks sit flush, or the dog bed may appear crooked.
Use an orbital sander or sanding block to smooth out the rough edges of each panel (Image 1). Add cushions (Image 2).
The decorating experts at HGTV.com share step-by-step instructions for building an A-frame kids' swing set.
The experts at HGTV.com share simple step-by-step instructions on how to build a deck around existing trees.
The experts at HGTV.com give simple step-by-step instructions on how to make modern outdoor seating by using repurposed wood...