How to Make a Pearl and Crystal Bead Hair Pin

Make a delicate decoration for your hair with pearls, crystal beads and silver jewelry wire.

Font
  • A
  • A
  • A

E-mail This Page to Your Friends

x

All fields are required.

Separate multiple e-mail addresses with a comma; Maximum 20 email addresses.

Refresh

Sending E-mail

Sending E-mail

Or Do Not E-mail

Success!

A link to %this page% was e-mailed

Materials and Tools:

22-, 24- and 28-gauge silver jewelry wire
pearls and crystal beads
flat sheets of copper silver
round-nose pliers
wire cutter
drill with small bit
jeweler's saw
sheet metal cutters
jewelry files
mandrel
rawhide mallet
small ball peen hammer
soldering iron
soft silver jewelry metal solder
flux and brush
sandpaper
masking tape
cookie sheet
rubber gloves
enamel paint
black fine tip marker
black construction paper
soap and water
cloths
polishing cloth

Steps:

1. Cut wire as follows:

  • 12-inch piece of 22-gauge wire
  • Four 3-inch pieces of 24-gauge wire
  • Six 12-inch pieces of 28-gauge wire
  • Two round loops made from 28-gauge wire


2. Shape the 12-inch wire into an S shape with loops at each end. This is the main body of the vine. Place it on a sheet of dark paper. Attach the wire to the paper with small pieces of masking tape.

3. Bend the four pieces of 3-inch wire around needle-nose pliers and shape them into loose spirals. 

4. Add the two looped 28-gauge wires to the vine and the six pieces of 12-inch 28-gauge wire.

5. With all of the wires taped down, place the lily vine hairpiece onto a cookie sheet and peel one piece of tape off at a time. Brush flux on the areas to be soldered. Solder the wires together using small amounts of jewelry solder and a soldering iron. Wash the piece with soap and water.

6. To shape the flowers: Draw six flowers on a sheet of 22-gauge metal using a black fine tip marker.

7. Drill holes in the center of each flower.

8. Use a sheet metal cutter or jewelry saw to cut out the metal flowers. Soften the edges of the flowers with a file.

9. Place the flowers on a mandrel and hammer the petals into a curved shape.

10. Solder the flowers to the vine, applying flux before the solder. Wash the hair pin with soap and water. Dry the piece and buff the metal with a polishing cloth.

11. To add pearls and crystals, use 28-gauge wires and string them one at a time, one to two inches from the base, folding and twisting the bead until the wire wraps to the base. Repeat this action until the wire has made three offshoots with beads that appear to be floating out from the vine.

12. Paint each flower with enamel paint. Paint two coats, letting each coat dry for at least eight hours between applications. Or apply a white layer under first, and then apply color over the top.

Mona Lisa, California
Website: www.monalisadesign.com

We Recommend...

How to Make a Beaded Handle and Flower Pin Purse

How to Make a Beaded Handle and Flower Pin Purse

Sew a handmade purse with grommets for beaded handles and an embellished suede flower pin.

How to Make a Dowel and Brass Plant Stand

How to Make a Dowel and Brass Plant Stand

A fresh take on a plant stand using materials found in your local hardware store, this wood and brass plant stand can be...

How to Make a Ceramic and Stone Necklace

How to Make a Ceramic and Stone Necklace

Design and glaze a ceramic charm necklace embellished with hanging Peruvian opals stones.

Advertisement

HGTV Inspiration Newsletter

Create your unique, personal style with advice and inspiration from HGTV.