How to Make a Mosaic Stained Glass Portrait

Attach stained glass pieces to adhesive paper placed over a photo to create a mosaic glass portrait.

Font
  • A
  • A
  • A

E-mail This Page to Your Friends

x

All fields are required.

Separate multiple e-mail addresses with a comma; Maximum 20 email addresses.

Refresh

Sending E-mail

Sending E-mail

Or Do Not E-mail

Success!

A link to %this page% was e-mailed

Materials and Tools:

enlarged photograph (color or black and white)
mat board
masking tape
clear adhesive shelf liner
several colors and shades of opaque stained glass
plastic containers
glass cutter
square-nose pliers
glass nippers
tweezers
diamond wheel glass grinder
safety glasses
latex gloves
black felt-tip pen
ultra-sticky clear adhesive film
piece of tile backer board (cement board)
craft knife
epoxy adhesive
notched trowel
roll of paper towels
instant glue
premixed grout
rubber float
sponge
picture frame
books (for weight)

Steps:

1. Tape the enlarged photograph face to a piece of mat board.

2. Cut a piece of clear adhesive film slightly larger than the photo.

3. Tape the adhesive film, sticky side up, over the photo with masking tape. The paper backing covering the adhesive film will be facing up.

4. Cut through the paper backing of the adhesive film with a craft knife. Then peel away portions of the paper backing to expose parts of the photo, starting with the face. If the entire photo is exposed, it tends to pick up dust from the room and reduce the stickiness of the adhesive.

5. Wearing safety glasses, score glass of assorted colors into strips with a glass cutter and break them with square-nose pliers.

6. Cut pieces of stained-glass strips into a variety of sizes with glass nippers. Store the pieces in plastic containers divided by colors.

7. Place the mosaic pieces on the adhesive over the photo. Use the photo as a guide to create the portrait. For some sections of the face, such as the eyes, the glass pieces will need to be ground on a glass grinder to achieve the right shape or smoothness.

8. Once the design is complete, place a stickier clear adhesive film over the top of the mosaic. Use a paper towel to smooth the adhesive.

9. Trim the edges of the adhesive film with a craft knife. Grab the edges and gently flip the piece over.

10. Peel away the less sticky adhesive film, leaving the glass adhered, face down, to the stickier film.

11. Cut a piece of cement board the same size as the photograph.

12. Mix the epoxy adhesive and trowel it onto the cement board.

13. Carefully pick up the film and the glass and put it on the cement board. Place heavy books on top to weigh it down.

14. Let the mosaic dry overnight.

15. Slowly peel away the clear face mounting film from the glass. Occasionally, the odd piece of glass won't have stuck and comes up with the sticky film-reattach it with instant glue.

16. Spread premixed grout over the tiles with a flat trowel, getting it into the cracks. With a damp sponge, wipe down the tiles to remove the excess grout.

17. Put the portrait in a picture frame.

We Recommend...

How to Make a Stained Glass Stepping Stone

How to Make a Stained Glass Stepping Stone

Create a colorful design and preserve it in a concrete setting.

How to Make a Glass Mosaic Vase

How to Make a Glass Mosaic Vase

Transform inexpensive art supplies into an elegant glass mosaic vase with these easy steps.

How to Make a Stained Glass Kaleidoscope

How to Make a Stained Glass Kaleidoscope

Use mirrors, glass and faceted beads to create a stunning kaleidoscope.

Advertisement

HGTV Inspiration Newsletter

Create your unique, personal style with advice and inspiration from HGTV.